LIP5/6/7 Intelligent Overload Unit

SKU: N/A Category:

LIP5 is an advanced electronic product that is used as current limiter between a 24V DC or 48V DC supply and 1 actuator.
When the adjusted current limit is reached because of the load of the actuator, and the load of the actuator hereby increased further, the speed of the actuator will be atuomatically reduced.This way the consumption will not exceed the adjusted level, e.g. 4 amp. for 24V and 2 amp. for 48V.

£89.89£110.85 +vat

Clear

Product Details

Description

ADVANCED ELECTRONIC CURRENT LIMITER

LIP5

LIP5 is an advanced electronic product that is used as current limiter between a 24V DC or 48V DC supply and 1 actuator.
When the adjusted current limit is reached because of the load of the actuator, and the load of the actuator hereby increased further, the speed of the actuator will be atuomatically reduced.This way the consumption will not exceed the adjusted level, e.g. 4 amp. for 24V and 2 amp. for 48V.

BUILT IN ACTUATOR PROTECTOR

LIP5 has a built in actuator protector. This means that the voltage will automatically be interrupted if the speed of the actuator gets relatively very low or stops completely because of a mechanic locking or end stop. LIP5 is delivered in a discreet plastic box, which also functions as a link between the supply and the actuator.

LIP6

LIP6 is an advanced electronic product, which is used as a current limiter between a 24V DC or 48V DC supply and 1 or 2 actuators.

LIP7

LIP7 is an advanced electronic product that is used as current limiter and overload unit between a 24-36-48VDC supply and for 1 actuator (motor). When setting for the current limiter is reached because of the actuator load, and the load on the actuator is further increased, then the actuator speed is automatically reduced, so that the current consumption does not exceed the set level. A heat resistant silicone cable is mounted as supply line. LIP7 is available in 3 versions: LIP7 Basis, LIP7 Tandem and LIP7 Open / Close.

LIP7- Tandem

LIP7 is available in 3 versions: LIP7 Basis, LIP7 Tandem and LIP7 Open / Close. LIP7 is an advanced electronic product that is used as current limiter and overload unit between a 24-36-48VDC supply and for 1 actuator (motor). When setting for the current limiter is reached because of the actuator load, and the load on the actuator is further increased, then the actuator speed is automatically reduced, so that the current consumption does not exceed the set level. A heat resistant silicone cable is mounted as supply line.

Additional information

specification

121326 LIP5 Intelligent Overload Unit, 121333 LIP6 Intelligent Overload Unit, 121305 LIP7 Basis Intelligent Overload 24/36/48V

Related Products